Suppressors

Our suppressors look different on purpose. Every model is 3D-printed in Grade 23 titanium and made in the USA, and the hexagonal body is what lets you get each can on and off without a fight.
 
Short Stack for 9mm pistols, Split for .22, Smokey and Spooky for rifles. You order online, and we ship to your local FFL/SOT.
4 Products

Which suppressor fits your gun?

Pick by what you shoot. All four are titanium, made in the USA, with no barrel length restrictions on the Split, Smokey, and Spooky.

Model Best for Max bore Length Weight Mount
Short Stack9mm pistols9mm3.75 in2.5 oz1/2x28 direct thread
Split.22 rimfire.224 in3.5 oz1/2x28 direct thread
SmokeyAR-15s and rifles up to 6.5mm.26 / 6.5mm6 in10 oz1/2x28 and 5/8x24 taper, both included
SpookyMagnum-rated centerfire.366 in10 oz1/2x28 and 5/8x24 taper, both included

Short Stack: a short 9mm suppressor with no booster

The Short Stack is one of the shortest 9mm pistol suppressors you can buy, at 3.75 inches and 2.5 ounces. Most pistol cans need a booster, also called a Nielsen device, to cycle reliably. The Short Stack doesn't, whatever your host or grain weight. It's slim enough that it won't block standard-height sights, so you don't need suppressor sights to use it.

Split: the .22 suppressor that opens up to clean

Rimfire is dirty, and most .22 cans end up with a baffle stack fused to the tube. The Split is the first patented suppressor that splits horizontally. Open it, wipe out the buildup, and close it again. Cleaning takes a few minutes, with no overnight soak and no fighting stuck baffles. It's 4 inches long and weighs 3.5 ounces.

Smokey and Spooky: titanium rifle suppressors

Smokey and Spooky share a 6-inch, 10-ounce titanium body, a low back-pressure design that cuts blowback and recoil, and a hexagonal quick mount. Both come with 1/2x28 and 5/8x24 taper mounts. The difference is bore size. The Smokey, named for Clint Smith of Thunder Ranch, takes AR-15s and rifles up to .26 / 6.5mm. The Spooky, named for the AC-130U gunship, opens up to a .36 bore and is rated for magnum centerfire.

Why they look different

We 3D-print every suppressor in Grade 23 titanium, the same alloy used in aerospace parts. Printing lets us build shapes a lathe can't, like the hexagonal body that gives you a real grip when mounting and the split housing on the Split. Each can is produced in the United States by an ISO 9001 and AS9100 certified manufacturer.

How to buy a suppressor online

  1. Order the suppressor here on the site.
  2. We file an ATF Form 3 to transfer it to your local FFL/SOT dealer.
  3. Once the ATF approves it, we ship it to your dealer.
  4. At the dealer, you fill out a Form 4 and pass a background check.
  5. When your Form 4 is approved, you pick it up.

Plan on about 35 to 45 days for processing, shipping, and the Form 3 approval. Not sure which dealer to use? Contact us and we'll help.

Frequently asked questions

What's the shortest 9mm suppressor you make?

The Short Stack, at 3.75 inches and 2.5 ounces. It runs on 9mm pistols without a booster or Nielsen device.

What's the difference between the Smokey and the Spooky?

Bore size. The Smokey is built for rifles up to .26 / 6.5mm, including AR-15s. The Spooky opens up to .36 and is rated for magnum centerfire. Length, weight, and mounts are the same.

How do you clean the Split?

Open the housing along its horizontal split, clean out the carbon and lead buildup, and close it. There's no baffle stack to push out.

Are there barrel length restrictions?

None on the Split, Smokey, or Spooky.

Where does my suppressor ship?

To your local FFL/SOT dealer, not to your home. You pick it up there after your Form 4 is approved.